Turbine Flow Meters | IDEX India

Turbine Flow Meters

The Sponsler Precision Turbine Flow meter measures volume by a contour mounted turbine in the flow system. The AC signal output is detected by a transducer and interpreted by various electronic devices used for flow rate indication and totalization. Sponsler Precision Turbine Flow meters are designed and manufactured to measure applications including low flow , sanitary , viscous & cryogenic fluids accurately . They are also engineered to precisely measure gases under varying conditions. The compact, rugged design of the Sponsler Turbine meter has established a new standard for flow measurement by exceeding the expectations of our industry for higher accuracy and reliability in all operating conditions.

The Sponsler Turbine meters are approved for custody transfer for petroleum liquids as well as for cryogenic fluids under the applicable category. They electronics including pre-amplifiers as well as the display are approved for use in hazardous areas

Materials of Construction

  • Meter
    Materials: 304 or 316 Stainless Steel
  • Internals
    304 or 316 Stainless Steel, 17-4pH Stainless Steel, Nickel

Design Features

  • High Resolution
  • Simple Installation
  • Compact Design
  • Low Pressure Drop
  • Variety of End Fittings
  • Wide Flow Range
  • Low Maintenance Cost
  • Available with a wide variety of outputs (Transmitters, IT400, T675)

Specifications

Type Precision Series Wafer Series Sanitary Series Low-Flo Series
Sizes 1/4″ to 12″ 1/2″ to 4″ 1/2″ to 4″* 0.020″ to 0.175″ orifice
End Fittings AN Flare, NPT, Flanged Wafer, mounts between two existing flanges Tri-clamp AN Flare, NPT, Flanged
Flow Rates 0.5 to 12,000gpm,0.35 to 12,000 ACFM 2.5 to 1,250gpm 0.25 to 650gpm 0.002 to 3gpm
Temperatures -430° to 450° F; +1000°F optional(-256.7°C to 232.2°C; 537.8°C optional) -430° to 450° F; +1000°F optional(-256.7°C to 232.2°C; 537.8°C optional) -100° to 450° F; (-73.3°C to 232.2°C; 537.8°C) -430° to 450° F; +1000°F optional(-256.7°C to 232.2°C; 537.8°C optional)
Accuracy +/-0.15% +/-1.0% +/-0.5% +/-1.0%
Repeatability +/-0.02% +/-0.1% +/-0.1% +/-0.25%

*3A approved 1/2″ through 4″

Specifications

Precision Series

Type Precision Series
Sizes 1/4″ to 12″
End Fittings AN Flare, NPT, Flanged
Flow Rates 0.5 to 12,000gpm,0.35 to 12,000 ACFM
Temperatures -430° to 450° F; +1000°F optional(-256.7°C to 232.2°C; 537.8°C optional)
Accuracy +/-0.15%
Repeatability +/-0.02%

 

Wafer Series

Type Wafer Series
Sizes 1/2″ to 4″
End Fittings Wafer, mounts between two existing flanges
Flow Rates 2.5 to 1,250gpm
Temperatures -430° to 450° F; +1000°F optional(-256.7°C to 232.2°C; 537.8°C optional)
Accuracy +/-1.0%
Repeatability +/-0.1%

 

Sanitary Series

Type Sanitary Series
Sizes 1/2″ to 4″*
End Fittings Tri-clamp
Flow Rates 0.25 to 650gpm
Temperatures -100° to 450° F; (-73.3°C to 232.2°C; 537.8°C)
Accuracy +/-0.5%
Repeatability +/-0.1%

 

Low-Flo Series

Type Low-Flo Series
Sizes 0.020″ to 0.175″ orifice
End Fittings AN Flare, NPT, Flanged
Flow Rates 0.002 to 3gpm
Temperatures -430° to 450° F; +1000°F optional(-256.7°C to 232.2°C; 537.8°C optional)
Accuracy +/-1.0%
Repeatability +/-0.25%

*3A approved 1/2″ through 4″

For more details, please fill in the Quick Contact Form and send it to us. We will be glad to assist!